Overview
UTR-9000E is built for dimensional accuracy: ±0.1 mm on 100 mm features with low overall shrinkage and a fine, high-detail surface.
It is the workhorse for appearance and structure verification in consumer electronics, home appliances and machinery — where fit matters more than ultimate strength.
Key Properties
Typical datasheet values; printed parts are anisotropic and XY-direction values are shown unless noted.
| Property | Value |
|---|---|
| Tensile strength | 38–56 MPa |
| Tensile modulus | 2589–2695 MPa |
| Elongation at break | 12–20 % |
| Flexural strength | 69–74 MPa |
| Izod impact (notched) | 35–55 J/m |
| Dimensional accuracy | 100 mm ± 0.1 mm |
| Hardness | 76–88 Shore D |
Typical Applications
- Consumer electronics master models
- Appliance structure and appearance verification
- Manufacturing tools and general prototypes
Printing & Handling Notes
Parts gradually yellow and creep under long sunlight exposure — store away from light. For higher strength or heat resistance step up to engineering resins or nylon.
