Overview
C-UV 9400EM is an ABS-like stereolithography resin with balanced mechanics (41–60 MPa tensile, 78–88 Shore D) and low shrinkage with good resistance to yellowing.
Its medium viscosity recoats and cleans easily, parts need minimal finishing, and it keeps dimensions well even in humid conditions — a dependable general-purpose master and prototype resin.
Key Properties
Typical datasheet values; printed parts are anisotropic and XY-direction values are shown unless noted.
| Property | Value |
|---|---|
| Tensile strength | 41–60 MPa |
| Tensile modulus | 2649–2730 MPa |
| Elongation at break | 8–12 % |
| Flexural strength | 69–79 MPa |
| Izod impact (notched) | 30–35 J/m |
| HDT @ 66 psi | 58–67 °C |
| Hardness | 78–88 Shore D |
Typical Applications
- Master patterns for vacuum casting
- Concept models
- Functional prototypes for automotive, medical and consumer electronics
Printing & Handling Notes
Datasheet values based on a 90-minute UV post-cure. Store and use below 25°C and 38% RH.
