Overview
Inn3D TPU 92A is a highly flexible elastomer with elongation beyond 500%, excellent elasticity and impact absorption, plus oil and chemical resistance.
Low warpage and low odor let it print stably on many machines, delivering a rubber-like surface feel for consumer-facing parts.
Key Properties
Typical datasheet values; printed parts are anisotropic and XY-direction values are shown unless noted.
| Property | Value |
|---|---|
| Shore hardness | 92A |
| Density | 1.23 g/cm³ |
| Tensile strength | 15 MPa |
| Elongation at break | >500 % |
| Izod impact | Not break（不斷裂） |
Typical Applications
- Phone cases
- Footwear parts
- Cushioning pads
- High-elasticity production parts
Printing & Handling Notes
Print at 210–240°C nozzle, 40–60°C bed, around 50 mm/s. Service range approximately 0–60°C.
